Discontinuities, Rock Deformation and Fluid Flow Around Emplacement Rooms
One of the major concerns for the design of the potential nuclear waste repository at Yucca Mountain is how to identify the fast flow paths and how to minimize the flow of the fast paths....
Rock Mass Mechanical Property Estimation Strategy for the Yucca Mountain Site Characterization Project
Rock mass mechanical properties are required in the design of repository drifts and ramps to assess the impact of thermal loads from the heat-generating wastes on excavation performance...
Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...
Scale Dependence of Effective Media Properties
For problems where media properties are measured at one scale and applied at another, scaling laws or models must be used in order to define effective properties at the scale of interest....
Full-Field Dye Concentration Measurement Within Saturated/Unsaturated Thin Slabs of Porous Media
This paper presents a full-field dye concentration measurement technique that extends our experimental capabilities to the measurement of transient dye concentration fields within steady...
Connectivity and the Continuum Approximation in Fracture Flow Modeling
The continuum assumption is frequently made when modeling flow in fractured media. The approach presented in this paper helps evaluating the validity of such an assumption. Two indices...
Modeling of Fluid and Solute Transport in Fractured Rock
A new model for flow and solute transport in fractured rock is proposed. It is based on the concept of a network of channels. The individual channel members are given stochastically selected...
Channel Network Models for Solute Migration and Dispersal
We introduce a class of channel-network models for solute migration and dispersal in saturated rock. In discussing the behaviour of any dispersive process it is necessary to compare and...
Solute Transport Characteristics of Fractured Dolomite in Southern Nevada, USA
Recirculating tracer tests in fractured Cambrian dolomite beneath the Amargosa Desert revealed (1) and 83-percent increased in apparent dispersivity resulting from a two-percent increase...
Radionuclide Transport in Fractured Media
Until recently, the classical advective-dispersive transport equation was considered to be an adequate model for describing the motion of a solute (e.g. radionuclides) in porous and fractured...
Photothermal Deflection Spectroscopy Investigations of Uranium Electrochemistry
Photothermal deflection spectroscopy (PDS) has been successfully applied to the study of uranium oxide electrochemistry. A brief description of PDS and preliminary results that demonstrate...
Geometric Analyses of Alternative Models of Faulting at Yucca Mountain, Nevada
Realistic cross section tectonic models must be retrodeformable to geologically reasonable pre-deformation states. Furthermore, it must be shown that geologic structures depicted on cross...
Characterization of Porosity in Support of Mechanical Property Analysis
Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of...
Resource Leveling Based on the Modified Minimum Moment Heuristic
CPMLevel is an MS Windows computer program that utilizes the minimum moment algorithm to smooth the histogram of a resource in both traditional and overlapped CPM networks. It has interactive...
A Rezoning Procedure for Finite Element Analysis of Rubber-like Materials
In this paper, we propose a rezoning procedure for finite element analysis of rubber-like materials. Rezoning procedures connect the distorted mesh and the newly created and undistorted...
Thin-Walled Finite Element for Curved Multicell Box Girders
The generalized Vlasov's thin-walled beam theory was combined with the finite element technique to develop a new curved thin-walled multicell box girder finite element which can model...
A Finite Difference Approach to the Modelling of Thick Bridge Decks
The finite difference method, although well known as an efficient numerical method, was applied in the past, in the case of slabs, only for the solution of thin slabs. In the present study,...
Object-Oriented Finite Element Modeling
The present paper studies the suitability of object-oriented modeling strategies for problems of structural mechanics. After a general discussion of the topic, special emphasis is put...
Research of the Limit Function About Imperfection and the Approximately Calculating Method of the Internal Forces of Hyperbolic Cooling Tower
The authors use the finite elemental program, which made by themselves and makes use of finite element method with rotational shell, to calculate the deformation in hyperbolic cooling...
Crack and Contact Problems in Masonry Arch Bridges
A two-dimensional finite element program has been developed to predict the load carrying capacity of masonry arch bridges with different structural defects such as missing bricks and tangential...
Return to search